BPWSD - TARTARIC ACID DISODIUM SALT, 6664
- MSDS: BPWSD
- Manufacturer: EM SCIENCE
- Product Name: TARTARIC ACID DISODIUM SALT, 6664
- National Stock Number: 6850-00N035993
Product Identification
Product ID:TARTARIC ACID DISODIUM SALT, 6664
MSDS Date:10/10/1988
FSC:6850
NIIN:00N035993
MSDS Number: BPWSD
Responsible Party
GIBBSTOWN, NJ 08027
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 609-354-9200
Cage: DO242
Contractor
Telephone: 800-424-9300 (CHEMTREC)
Cage: DO242
Ingredients
NO INGREDIENT FOR THIS FORMULATION_INGREDIENT
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NO HARMFUL EFFECTS INDICATED FROM
AVAILABLE INFORMATION. HANDLING CARE GENERALLY IN KEEPING WITH SAFE
LABORATORY PRACTICES IS RECOMMENDED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:GET MEDICAL ASSISTANCE FOR ALL CASES OF OVEREXPOSURE. SKIN:
WASH THOROUGHLY WITH SOAP AND WATER. EYES: IMMEDIATELY FLUSH
THOROUGHLY WITH WATER FOR AT LEAST 15 MIN. INHAL: REMOVE TO FRESH
AIR; GIVE ART F RESP IF BREATHING HAS STOPPED. INGEST: GET IMMED
MEDICAL ATTENTION; IF CONSCIOUS, GIVE WATER FREELY.
Fire Fighting
Extinguishing Media:WATER, FOAM, CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE INDICATED.
Accidental Release
Spill Release Procedures:EVAC AREA OF ALL UNNEC PERSONNEL. WEAR
SUITABLE PROT EQUIP LISTED UNDER EXPOS PERSONAL PROT. ELIM ANY
IGNIT SOURCES UNTIL AREA IS DETERMINED TO BE FREE FROM EXPLO OF
FIRE HAZ. CONTAIN THE RELEASES & E LIMINATE ITS SOURCE, IF THIS CAN
BE (SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CNTNR CLSD WHEN NOT IN USE. STORE
AT CONTROLLED ROOM TEMPERATURE. DO NOT BREATHE DUST. DO NOT GET IN
EYES. AVOID PRLNGD/RPTD SKIN CONTACT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:MATERIAL SHOULD BE HANDLED OR TRANSFERRED IN AN APPROVED
FUME HOOD OR WITH ADEQUATE VENTILATION.
Protective Gloves:NEOPRENE OR EQUIVALENT.
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:EYE WASH AND SAFETY EQUIPMENT SHOULD BE
READILY AVAILABLE.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
SPILL PROC: DONE WITHOUT RISK. TAKE UP AND CONTAINERIZE FOR PROPER
DISPOSAL AS DESCRIBED UNDER DISPOSAL.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:LOSES2H*2O
Spec Gravity:1.82 (H*2O=1)
Solubility in Water:SOLUBLE
Appearance and Odor:WHITE CRYSTALLINE POWDER
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES OF CARBON.
Disposal
Waste Disposal Methods:COMPLY WITH FEDERAL, STATE, AND LOCAL
REGULATIONS ON REPORTING RELEASES. REFER TO REGULATORY INFORMATION
FOR REPORTABLE QUANTITY AND OTHER REGULATORY DATA.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.